General Safety Instructions - Umarex Laserliner CompactCross-Laser Pro Bedienungsanleitung

Completely read through the operating instructions, the "Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
Function / Application
Automatic cross line laser with green laser technology for aligning tiles,
wall studding, windows, doors etc.
– The slope-mode feature is an extra that permits gradients to be laid out.
– GRX-ready: integrated hand-held receiver mode
– Digital Connection interface for remote control of the device
– Automatic levelling range: ± 4°, Accuracy: ± 0,35 mm / m

General safety instructions

– The device must only be used in accordance with its intendedpurpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
Laser radiation!
Do not stare into the beam!
Class 2 laser · < 1 mW · 515 nm
EN 60825-1:2014/AC:2017
CompactCross-Laser Pro
11
EN