Langmatz EK 440 Installationsanleitung Seite 8

4.5 Inserting the rubber grommets
1
Fig. 8
5. Accessories
Item Name
1 Accessories kit for 5 mm in-house cable
(strain relief/grommet insert/pressure plate/
notched screws)
2 Accessories kit, direct in-house cable
connection for fastening the aramid yarn
(12 x notched screws)
3 Accessories kit, retainer clip/strain relief screw
4
Accessories kit (strain relief for micropipe)
Packaging unit: 10 units each
6. Disposal/recycling
At the end of the service life, the optical distribution and termination box must be
recycled and/or disposed of according to the applicable statutory regulations.
.
D-82455 Garmisch-Partenkirchen Telephone: +49 (0)8821 920-0
E-mail: info@langmatz.de
Our hotline: +49 (0)8821 920 137
70 083 0800/001 | Last updated 31.05.2017
Insert 2x rubber grommets (1) into the
•
fixture provided.
• Rotate the rubber grommets by 90°
each for different cable diameters
(see example in Fig. 8).
• Note: The rubber grommets must always
2
be inserted in such a way that the contin-
uous sealing barrier (2) faces outwards.
Ø 7 mm
Ø 10 mm
Ø 12 mm
www.langmatz.de
4
Article number Image
064400501
064400502
064400503
064400505
064400506
064400507