Installation instructions
Langmatz compact optical distribution
and termination box
Optical distribution and termination box EK 440
1. Safety information
•
These installation instructions are addressed to technically trained expert
personnel.
•
The applicable regulations for accident prevention and handling optical fibres are
to be observed!
•
Please note the possibility of laser radiation in the non-visible spectrum!
•
Never look into open fibre ends.
2. Technical data
Dimensions H x W x D:
Total weight:
Housing material:
Housing colour:
Protection rating:
Impact Protection (IK) Rating:
3. Scope of delivery and screw connection points
1
3
4
Fig. 1
242 x 163 x 46 mm
approx. 0.5 kg
Plastic – Polycarbonate (PC)
Light grey RAL7035
IP54
IK06
140
2
34
6
5
Dimensions for screw connection points as
shown in Fig. 1.
Item 1
1 x housing cover and fastening
screw
Item 2
1 x housing with adaptor
mounting support and crimp
splice protector storage,
12-splices
Not depicted:
Design with heat shrink splice
protector storage, 12-splices
Accessories:
Item 3
3 x fastening screws with
dowel for wall installation
Item 4
1 x retainer clip for micropipe
Item 5
1 x notched screw
Item 6
2 x sealing grommets for cable
outlet