Montarbo WIND PRO-Serie Bedienungsanleitung Seite 19

WIND PRO
WIND PRO 208A
Enclosure Vented - Quasi 3-Way Point Source
Components Custom-designed to Montarbo
LF + HF 1 x 8" Neodimiun Coaxial loudspeker with voice coil 2", Driver 1" with voice coil 1.7" and custom passive
filter
Auxiliary LF 1 x 8" Neodimiun Woofer with voice coil 3". Constant directivity horn (110° Conical)
Frequency response 70 Hz - 18 kHz
Continuous SPL 132 dB
Built-in amplifier 2 class-D power units
LF+HF power RMS
800 W for channel
Built-in DSP Montarbo 24bit 96kHz converter, M-Modeling
®
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurethane, grille Black painted Stee
Fittings
12 x M10 Flying Points, 2 Side Handles D. 35 mm Pole Mount Built-in hardware for suspension
Dimensions W 296 x H 551 x D 373 mm
Weight 20 kg
WIND PRO 210A
Enclosure Vented - Quasi 3-Way Point Source
Components Custom-designed to Montarbo
LF + HF 1 x 10" Ferrite Coaxial loudspeker with voice coil 3", Driver 1,1" with voice coil 2,4" and custom passive
filter
Auxiliary LF 1 x 10" Neodimium Woofer with voice coil 2,5". Constant directivity horn (70° H x 50° V)
Frequency response 65 Hz - 18 kHz
Continuous SPL 135 dB
Built-in amplifier 2 class-D power units
LF+HF power RMS
800 W for channel
Built-in DSP Montarbo 24bit 96kHz converter, M-Modeling
®
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurethane, grille Black painted Stee
Fittings
7 x M10 Flying Points, 2 Side Handles D. 35 mm Pole Mount Built-in hardware for suspension
Dimensions W 345 x H 631 x D 405 mm
Weight 25,80 kg
36
specifications.
®
specifications.
®
WIND PRO 212A
Enclosure Vented - Quasi 3-Way Point Source
Components Custom-designed to Montarbo
LF + HF 1 x 12" Neodimiun Coaxial loudspeker with voice coil 3", Driver 1,1" with voice coil 2,4" and custom
passive filter
Auxiliary LF 1 x 12" Ferrite Woofer with voice coil 3". Constant directivity horn (70° H x 50° V)
Frequency response 60 Hz - 18 kHz
Continuous SPL 139 dB
Built-in amplifier 2 class-D power units
LF+HF power RMS
1200 W for channel
Built-in DSP Montarbo 24bit 96kHz converter, M-Modeling
®
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurethane, grille Black painted Stee
Fittings
7 x M10 Flying Points, 2 Side Handles D. 35 mm Pole Mount Built-in hardware for suspension
Dimensions W 384 x H 731 x D 433 mm
Weight 38,30 kg
WIND PRO 215A
Enclosure Vented - Quasi 3-Way Point Source
Components Custom-designed to Montarbo
LF + HF 1 x 15" Neodimiun Coaxial loudspeker with voice coil 3", Driver 1,1" with voice coil 2,5" and custom
passive filter
Auxiliary LF 1 x 15" Ferrite Woofer with voice coil 3". Constant directivity horn (70° H x 50° V)
Frequency response 55 Hz - 18 kHz
Continuous SPL 141 dB
Built-in amplifier 2 class-D power units
LF+HF power RMS
1200 W for channel
Built-in DSP Montarbo 24bit 96kHz converter, M-Modeling
®
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurethane, grille Black painted Stee
Fittings
7 x M10 Flying Points, 2 Side Handles D. 35 mm Pole Mount Built-in hardware for suspension
Dimensions W 440 x H 911 x D 495 mm
Weight 46,60 kg
User manual
specifications.
®
specifications.
®
37