Montarbo WIND PRO-Serie Bedienungsanleitung Seite 13

WIND PRO
WIND PRO 210A
4
The Montarbo WIND PRO 210A is an amplified acoustic
loudspeaker designed to guarantee extremely
performance in terms of power and quality. The "Quasi 3-vie"
acoustic design combined with a sophisticated audio signal
processing system defines the new point-source standard,
result of a 1,1" (voice coil: 2,4") high-frequency coaxially
horn-loaded driver with a 10" transducer with 3" voice coil,
and an additional 10" woofer with 2,5" voice coil. The birch
plywood cabinet with a polyurea finish is characterized by
high strength thanks to a complex structure of internal wood
and steel reinforcements.
The two woofers, loaded in back-reflex configuration,
A
C
B
F
E
F
A Neodymium coaxial woofer with 1,1" driver and 10"
transducer.
B 10" neodymium woofer with 2,5" voice coil
C
Birch plywood cabinet with abrasion-resistant finisch.
D Black painted steel protective grille.
E Carrying handle.
F
Control and connection panel.
24
guarantee a fast, powerful defined low-frequency response,
high without interference in the middle range thanks to the
asymmetrical crossover that allows only the upper woofer
the reproduction of the vocal range. The coaxial coupling of
the high frequency driver ensures a coherent and transparent
overall response, and an extremely linear 70° horizontal and
50° vertical coverage.
The Class-D amplifier features two high-efficiency channels,
ensuring 1600W RMS total power that allows the speaker
135 dB SPL with 65 Hz to 18 kHz frequency response.
G Pole-mount adapter.
H
Pickup points
Materials and construction methods meet the highest
professional standards in order to ensure maximum
reliability.
WIND PRO 212A
5
Montarbo WIND PRO 212A
loudspeaker designed to guarantee the highest performance
in terms of power and quality. The "Almost 3-way" acoustic
design combined with a sophisticated audio signal processing
system sets the new standard for point-source, resulting
in a 1.1" high frequency driver (voice coil: 2.4") coaxially
horn-loaded with a 12" transducer with 3" voice coil, and an
additional 12" woofer with 3" voice coil. Polyurea-coated birch
plywood cabinet characterised by high strength thanks to a
complex structure of internal wood and steel reinforcements.
The two woofers, loaded in back-reflex configuration,
guarantee a fast, powerful and defined low frequency
A
C
E
B
D
F
G
E
H
H
A Neodymium coaxial woofer with 1,1" driver and 12"
transducer.
B 12" ferrite woofer with 3" voice coil
C
Birch plywood cabinet with abrasion-resistant finisch.
D Black painted steel protective grille.
E Carrying handle.
F
Control and connection panel.
is an amplified acoustic response, without interference in the midrange thanks to the
asymmetrical crossover allowing the upper woofer alone to
reproduce the vocal range. The coaxial coupling of the high-
frequency driver ensures a consistent and transparent overall
response, and an extremely linear horizontal dispersion of 70°
and vertical dispersion of 50°.
Class D amplification consisting of two high-efficiency
channels, for a total power output of 2400W RMS, with
speaker sound pressure levels of 139 dB and a frequency
response ranging from 60 Hz to 18 kHz.
G Pole-mount adapter.
H
Pickup points
Materials and construction methods meet the highest
professional standards in order to ensure maximum
reliability.
User manual
E
D
G
H
25