AsViva EKC6 Betriebsanleitung Seite 50

OPERATION
USE THE REMOTE CONTROLLER
2.4 Ghz remote control with ridge function. Thus parents always have full control.
The remote control has priority over the foot pedal operation.
(The foot controller does not work while you operate the remote control.)
NOTE: Batteries (2 x 1.5V AAA) are not included in the scope of delivery.
Forward button
Brake button
Reverse button
1. Establish connection
Hold down the connection button for 2 to 4 seconds and then switch on the power switch on the
vehicle's dashboard.
The „slow" speed display should now light up continuously. If the display only flashes, the connecti
on has not been established. In this case, change the batteries and repeat the above step.
2. Brakes
You can stop the vehicle by pressing the brake button.
The brake is released again by pressing the button again.
3. Cruise control
With this button you can set the desired speed.
HINT: The vehicle is designed to operate in low speed only in reverse.
50
Speed select button
High speed indicator
Normal speed indicator
Low speed indicator
Connection
button
Left turning
button
Right turning
button