ASSEMBLY
ATTACH STEERING COLUMN
Turn the vehicle body sideways
1. Insert the steering column through the hole A in the steering plate, the hole in the vehicle body and out
the hole in the dash.
2. Insert the bent end of steering column through the hole B in the front axle linkage.
3. Fit a Ø10 washeronto the steering column.
4. Insert a split pin (4) into the hole in the steering column, bend the ends of split pin back using a long nose
pliers
(not included)
40
.
Steering
Steering
column
plate
1
4
5
3
4
Hole A
2
Hole B
Hole A