Connecting To A Av Amplifier With A Built-In Decoder - Denon Professional DN-V200 Bedienungsanleitung

ENGLISH

(4) Connecting to a AV amplifier with a Built-in decoder

When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from
the DVD player's digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can
achieve sound with the power and sense of presence of a movie theater or concert hall.
DN-V200/DN-V300
Optical fiber cable
Front speaker (left)
AV amplifier with a built-in decoder
(AV control center)
Surround speaker (left)
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS
is played while using a decoder, etc., that is not DTS-compatible.
Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
2
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
8
All manuals and user guides at all-guides.com
To power outlet
Center speaker
Front speaker (right)
Digital audio input
connector (OPTICAL)
Subwoofer
Surround speaker (right)
Line up in proper direction
Sound output from the DN-V200/DN-V300's digital audio output connectors
2
In the case of bit stream output
Audio recording format
Dolby Digital Dolby Digital bitstream
DVD video DTS
MPEG Audio
In the case of PCM output
Audio recording format
Copy protection ON
48 kHz / 16 ~ 24 bit No output data (*1)
DVD Linear
video PCM
96 kHz / 16 ~ 24 bit No output data (*2)
Video CD MPEG 1
Music CD 44.1 kHz / 16 bit Linear PCM
MP3 CD MP 3 (MPEG-1 Audio Layer 3)
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are
output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to "96k>48k" or make
analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to
96kHz/24 bit, providing higher sound quality than music CDs.
Settings
DIGITAL OUT
NORMAL PCM
2 channels PCM
(48 kHz / 16 bit)
DTS bitstream DTS bitstream
2 channels PCM 2 channels PCM
(48 kHz / 16 bit) (48 kHz / 16 bit)
Settings
LPCM (44.1 kHz / 48 kHz)
OFF
Copy protection OFF
48 kHz / 16 ~ 24 bit PCM 48 kHz / 16 bit PCM
96 kHz / 16 ~ 24 bit PCM 48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM 44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM 44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM 32 ~ 48 kHz / 16 bit PCM
ON