Cannot Access Your Router Message - Belkin AX1800 Bedienungsanleitung

If your internet service is cable, verify that the cable
modem's CABLE port is connected to the coaxial cable
provided by your ISP.
• If your computer was previously connected to your modem with a USB cable, disconnect the
USB cable.
• Install the router again.
Cannot access your router
To access your router, you must be connected to your own network. If you currently have wireless
internet access, the problem may be that you have accidentally connected to a different wireless
network.
To fix the problem on Windows computers, do the following*:
1. On your Windows desktop, click on the wireless icon in the system tray. A list of available
networks will appear.
2. Click your own network name. Click Connect. In the example below, the computer was
connected to another wireless network named wraith_5GHz. The wireless network name of
the Belkin RT series router, Damaged_Beez2.4 in this example, is shown selected.
If your internet service is DSL, make
sure that the DSL phone line is
connected to the modem's DSL port.
message
18