FS MINI UNMANAGED 10GIGABIT FIBER MEDIA CONVERTER Schnellstartanleitung Seite 10

Connecting to the SFP+ Port
1. Insert an SFP+ transceiver into the SFP+ slot.
2. Connect a ber optic cable to the SFP+ transceiver. Plug the other
end of the ber optic cable to the ber network. TX and RX must be
paired at both ends.
NOTE:
supported. Make sure both side of the SFP+ transceivers are
with the same media type.
Both multimode and single mode cablings are
EN - 9 -