Power Supply - Rollei LUMIS LED-Panel Bi-Color Anleitung

Power Supply

20
Use with mains cable:
– Insert the mains cable supplied into the mains cable input [11] of
the Rollei LUMIS LED Panel Bi-Color.
– Press the on/off switch [1] to position "I" to switch on the LED
light. In position "O", the light is switched off.
Use with rechargeable batteries of the type
Sony NP-F750 or NP-F770:
– Connect the batteries (not included) via the battery mounts [3] on
the back of the Rollei LUMIS LED Panel Bi-Color.
– Press the on/off switch [1] to position "I" to switch on the LED
light. In position "O", the light is switched off. For battery
operation we recommend batteries of the type Sony NP-F750 or
NP-F770 (max. 7.2 V).
– Press the battery charging level button [8] to see the remaining
battery charging level on the display. The higher the number
shown on the display, the higher the charging level of the batte-
ries mounted. E1 indicates a charging level of 10%, E10 indicates
a charging level of 100%.
– To release the batteries, press the battery release button [2] on
the side of the battery mounts.
Note:
When both AC/DC adapter and batteries are connected to the
Rollei LUMIS LED Panel Bi-Color, the batteries won't be charged.
ENGLISH