Young Living Lantern Diffuser Bedienungsanleitung Seite 6

Operating Instructions
1. Remove the decorative outer cover and inner lid of the unit.
2. Make sure that the reservoir is empty of water.
3. Turn the unit onto its side and insert the power adaptor plug securely
into the jack, found at the bottom of the unit. Once installed, the cord
should be able to rotate freely over the air intake vents.
4. Set the unit on a hard, flat surface, making sure that the cord exits
between the feet of the unit.
5. Position the unit so the buttons are facing toward you.
6. Add water to the reservoir until the level reaches but does not exceed
the water fill line.
7. Add 8–10 drops of essential oil.
8. Place the inner lid back onto the unit. Make sure to align the groove on
the lid with the half circle feature on the outer surface of the reservoir,
located above the buttons. The lid should sit flush on the reservoir all
around or leaking will occur.
9. Replace the decorative outer cover.
10. Plug the power adaptor into a power outlet.
11. Press the On/Off button to switch the unit on.
12. The unit should produce mist, and the LED light should be on.
6