Werbung
`
Montaj yerinin, Montaj Askısı, Duvara/Tavana/Korkuluğa Montaj Parçası ve
Kameranın toplam ağırlığının en az 4 katına dayanabildiğinden emin olun.
`
Montaj Askısı, 1,5" PF vida dişli boruya ve ayrıca Duvara/Tavana/Korkuluğa
Montaj Parçasına da bağlanabilir.
`
Ujistěte se, že montážní místo unese alespoň čtyřnásobek celkové
hmotnosti závěsného adaptéru, montážní konzoly na zeď/stropního držáku/
montážní konzoly na parapet a kamery.
`
Závěsný adaptér můžete připojit k trubce s 1,5palcovým trubkovým
závitem NPT a také k montážní konzole na zeď/stropnímu držáku/montážní
konzole na parapet.
`
設置場所がハンギングマウント、 壁/天井/パラペッ トマウント、 カメラの総重
量の4倍以上を十分耐えられるところに設置してください。
`
ハンギングマウントは壁/天井/パラペッ トマウントB52の他にも1.5" PFねじ山
が加工されたパイプ(Pipe)に接続して使用できます。
` `
安装场所必须要满足可以支撑悬挂式安装组件、 壁挂式/天花板/栏杆安装组
件和摄像机总重量四倍的条件。
` `
悬挂式安装组件除了壁挂/天花板/栏杆支架B52之外， 还可以与有1.5" `PF螺
丝扣的导管(Pipe)连接使用。
설치장소가 걸이용 마운트, 벽부형/천장형/파라펫 마운트, 카메라의 총중량의 4
`
배 이상을 충분히 견딜 수 있는 곳에 설치하세요.
걸이용 마운트는 벽부형/천장형/파라펫 마운트 외에도 1.5" PF 나사산이
`
가공된 파이프(Pipe)에 연결하여 사용 가능합니다.
Installation
1 Insert the Hanging Mount to 1.5" PF screw-thread (female) pipe
or to the Wall/Ceiling/Parapet Mount (SBP-300WM or 300WM1/
300WMW1/300CM/300CMW/300LM/300LMW) and turn it
counterclockwise to secure to the Pipe or Mount.
J
`
Make sure you fix the Pipe or Mount so that it reaches to the end
of the 1.5" PF screw thread on the Hanging Mount. If not secured
tightly, the Hanging Mount may loosen from the Pipe or Mount,
causing physical damage or malfunction.
(Make sure you check the connection between two components
before proceeding with the next step.)
2 After aligning the installation direction guides of the hanging
mount, push the main cover upward and turn it counterclockwise
until it is secured.
`
Install the camera according to the camera's installation guide.
3 Tightly fasten the 3 mounting screws on the top side of the
Hanging Mount.
Product Specifications
Product Name
SBP-156HMW
XNP-9300RW / XNP-8300RW /
XNP-6400RW
Supported product
* models can be added without
notice
Color / Material
White / Aluminum
RAL Code
RAL9003
Product dimensions
Φ95.5 x 84.0 mm ( Φ3.76 x 3.31")
/ weight
/ 200 g (0.44 Ib)
Product Overview
Φ46.8 [1.84]
1-1/2" PF Tap
mm[inch]
PT01-005644B
Werbung
