Operation - stafil 10026011 Gebrauchsanweisung

OPERATION:

Pay attention to the power button! By pressing it the machine starts to work without the need of having
to press the pedal.
Insert the cable of the pedal and of the electric plug into the appropriate sockets.
"Power input" for the electric plug.
"Pedal input" for the pedal
Then connect the electrical outlet to a power outlet.
Alternatively, you can use 4 AA batteries to insert under the sewing machine.
Load both coils supplied:
1) Pull up the "threaded wire" and insert a thread spool to load the spools supplied.
2 Pull out the "winding pole" by applying light pressure on it and rotating it in the following direction
arrows drawn on the handwheel. (Photos 1 and 2)
3) Hand tie some thread on the bobbin by hand.
4) Place it on the "winding pole" so that it remains fixed.
5) Actuate the rolling through the "power" button or by pressing the pedal (Photo 3)
Position the bobbins and thread the needle:
1)Place the bobbins in the appropriate positions as shown in Photo 4.
2)The path that the thread must follow until it enters the needle hole is shown in Photos 5, 6, 7, 8, 9, 10, 11.
1.
4.
7.
2.
5.
8.
3.
6.
9.
15