Brake Adjustment - Modster M777 Bedienungsanleitung

BRAKE ADJUSTMENT

When adjusting the brake, make sure that the brake
surface contacts the brake disc tightly when the handlebar
is clenched to the middle.
If you feel the brakes are not working well, you can use the
brake cable tension adjusting screw to adjust the brake
stroke.
This screw is located at the brake handle. Turn the brake
cable screw inward to relax it and the brake shoe will be
farther away from the rim; turn the brake cable screw
outward to tighten it and the brake shoe will be closer to the
brake disc.
FRONT LIGHT AND HORN
The scooter is equipped with a front
light. The light can be turned-on
pressing the red button on the
handlebar.
Press it again to turn the light off.
Below that button, you can also find
the horn button.
9