Oska PULSE Gebrauchsanleitung Seite 13

The AC charging adapter supplied with Oska Pulse is a certified Medical Grade
adaptor (Globtek, type GTM46101-1005-USB). Contact Oska, Inc. or local distributor
to obtain a replacement. If using another AC adaptor other than Oska supplied, please ensure a certified
adaptor to medical device safety standard (IEC 60601-1) with an output marked Class 2 or meeting
limited power source (LPS) requirements, and not to exceed 16V.
When the device is connected to a power source, LED lights located at the opposite end
of the charging port will illuminate. If the battery is fully depleted the LEDs may take a few
minutes to illuminate. The LEDs will remain lit (not pulse) until the device is fully charged, then
will turn out. It may take up to three (3) hours for the battery to reach a full charge.
A fully charged battery can provide ten (10) or more 90-minute sessions. Battery charge time
may vary by environmental conditions and use patterns. Battery life may decline following
extended use. The battery is not user replaceable.
13