Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Clock
· Press FUNCTION button
Timer displays the clock function every time it is powered on.
· To change the time, hold SET button
· Set target time by pressing + / -
digit setting.
· Hold SET button
for 3 seconds to exit and save the settings. Timer returns to display time.
· Double fast tap SET button
· Press + / - button
+
-
dn Countdown Timer
· Press FUNCTION button
· To set a new time, hold SET button
· Set the target countdown time by pressing + / - button
on to the next digit setting.
· Hold SET button
for 3 seconds again to save the settings.
· Press START button
UP Count up Timer
·
Press FUNCTION button
·
To set a new timer, hold SET button
·
Set target time by pressing + / - button
Each pressing of SET button
·
Hold SET button
for 3 seconds again to save the settings.
·
Press START button
·
HI H2 Intervall Timer
Interval timer is for gym workout time and rest time interval count down. Timer beeps once when workout time ends
and beep twice when rest time ends. Two green digits display round, another 4 digits display MM:SS format time.
·
Press FUNCTION button
Hold SET button
for 3 seconds into setting, the first green digit starts blinking when selected to be set.
·
Set the round by pressing + / - button
·
Hold SET button
a second time to set H1 workout time.
Input the value by pressing + / - button
Each pressing of SET button will move to the next digit setting.
·
Hold SET button
a third time to set H2 rest time.
· Once all settings are completed, hold SET button
·
Press START button
FTC Functional Training Company GmbH | www.perform-better.de | Support: 49 89 444 4679-250 info@perform-better.de
to select clock function. Or hold START
for 3 seconds into the setting mode, the first digit starts blinking.
button and SET button
to shift between 12-hour and 24-hour display format.
to adjust the brightness across 4 levels.
to select the countdown timer function.
for 3 seconds into the setting mode, the first digit starts blinking.
to begin the new countdown timer.
to select the count up timer function.
for 3 seconds into the setting mode, the first digit starts blinking.
and SET button
+
-
will move to the next digit setting.
to begin the new count up timer.
to select the count up timer function.
.
+
-
and SET button
to begin the new interval timer.
button for 3 seconds to turn on the display.
. Each pressing of SET button will move to the next
and SET button
. Each pressing of SET button will move
.
.
a fourth time to save and exit the setting. Timer will stop blinking.
5
Werbung
