Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Details
· Item: 6 digit 1 inch tiny gym timer
· Dimension: 155mm X 47 mm X 22 mm
· 1 inch tall crystal bright led display for maximum visibility.
· Material: ABS sleek case & acrylic lens, integrated top buttons.
· Power Input: AC 100–240 volts (V), 50/60 hertz (Hz)
· Power Output: DC 5V, 1A .
· Strong magnet on the back to be mounted on metal surface.
Button Layout
On/off button: press and hold for 3 seconds to turn on/ off.
+ / - button: increase/decrease the value, adjust brightness. Hold the button for few seconds to fast increase or
decrease.
Function button: select between 7 function modes.
Set button: press and hold for 3 seconds into setting mode.
Start/stop button: press to start / stop the timer.
Reset: double fast tap the START button. Stop the timer before resetting timer.
Battery light: small red light on the top. Led light turns on when timer is charged, turns off in full charge and timer
displays "Lo" when battery is low.
General Settings
There are 7 modes on the mini gym timer. The setting procedure is similar for clock and all programmable timer modes.
·
Clock: HH:MM 12-hour/ 24-hour time display.
·
Countdown timer: Dn MM: SS. Programmable, max countdown from 99:59.
·
Count up timer: UP MM: SS. Programmable, max count up to 99:59.
·
Interval timer: RR MM: SS. Programmable workout time, rest time and max 99 rounds.
·
TABATA timer: Pre-programmed interval timer 8 rounds of 20 seconds workout and 10 seconds rest.
·
Fight Gone Bad timer: Pre-programmed interval timer 3 rounds of 5X1 minute workout and then 1 minute rest.
·
Stopwatch: MM: SS: MS. count up from zero up to 99 minutes 59 seconds and 99 hundredths of a second.
·
Press FUNCTION button
To start the most recently used timer
· Press START button
To set a new timer
· Hold de SET button
· Set target time by pressing + / -
Press + / -
button to change the time. Each pressing of SET button will move on to the next digit setting.
+
-
·
Hold SET button
for 3 seconds to save the settings. Timer will stop blinking.
·
Press START button
To reset the timer
·
Pause the timer and then double fast tap START button .
FTC Functional Training Company GmbH | www.perform-better.de | Support: 49 89 444 4679-250 info@perform-better.de
PB Mini Intervall timer - Manual English
to select the desired function.
to begin the timer directly after pressing FUNCTION button
for 3 seconds in the setting mode, the first digit starts blinking.
button and SET
+
-
to begin or pause the new timer.
button.
to select the timer mode.
4
Werbung
