Install Power Supply; How To Use The Usb Playback Function - Kindermann Soundbar 2.1 Montage- Und Bedienungsanleitung

8.3. Install power supply

Plug in the power supply to DC connector and AC mains sockets.
Please note:
Do not connect the power supply unit, before all connections have been established.

8.4 How to use the USB playback function

1. Connect your USB memory device to the USB port of the soundbar.
2. Select USB input the remote control of via front key.
3. Start playing audio files stored on your USB device.
Please note:
Supported file formats: MP3 / WMA / SBC / WAV
Maximum supported size of a USB drive is 128 GB
USB memory devices must be formated with FAT / FAT32 / NTFS
The audio files can be stored in different folders.
Soundbar will play the files depending on the date they have been copied to the thumb drive:
Example:
Root folder
- file 1 - copied at 01.01.2021
- file 2 - copied at 15.01.2021
- file 3 - copied at 27.03.2021 and so on...
then the subfolder in alphabetical order
- file 1 - copied at 13.01.2021
- file 3 - copied at 15.02.2021
- file 2 - copied at 20.04.2021 and so on...
Files with identical date will be played in alphabetical order.
White
color LED
USB Device
20