Installation Of M.2 2280 Module - techBite ZIN 3 HD 128GB Bedienungsanweisung

© 2021 techBite. All rights reserved. ZIN 3 HD 128GB - EN
Locate the memory cover. It has two screws.
a Screw
a Screw
Cut-out
Unscrew both screws with a small crosshead screwdriver. Gently raise the cover
at the cut-out location and lift it off.
Protection for
module M.2 2280
M.2 B
Socket

10.2 Installation of M.2 2280 module

Unscrew the retaining screw on the stop and remove it. Slide the M.2 2280
gently into the connector until the cut-out in the module fits into the socket.
Secure the module by gently screwing it to the housing. Replace the
compartment cover and tighten the screws that secure it.
With the help of the tool located in:
Control panel \ All elements of the control panel \ Administrative tools \ Computer
management \ Disk management
you can create and delete partitions on the new disc. Once you have set up your
operating system partition, find the new disc and format it according to your
preferences.
We strongly advise against any manipulation of the parameters of " Disc 0 ",
which is a system disc, as any problems caused by interference in its structure may
result in voiding the warranty.
36