Antlion Audio ModMic Wireless Bedienungsanleitung Seite 2

ModMic Wireless
Initial Setup of your ModMic Wireless
1. Connect the USB extension to a USB port and attach the USB receiver. Place the receiver in clear line of sight
to your ModMic, ideally away from other wireless devices.
2. Power on the the ModMic Wireless by quickly pressing the button located on the ModMic Wireless Base
The blue light will be solid. Your ModMic Wireless comes paired with your receiver out of the box.
3. Ensure the ModMic is unmuted (no red lights should be on).
4. Select the USB receiver as the default device in your microphone settings. Your ModMic Wireless is now
ready to use!
Charging
1. Insert the USB charging cable into any USB 2.0 or higher port.
2. Plug the USB cable into the ModMic Wireless' micro USB port. A yellow indicator light should be blinking
slowly to indicate charging. A solid yellow light indicates full charge.
Mute and Power Off
1. To mute the ModMic while in use simply tap the power button. A red indicator light will appear on both
your ModMic and your Wireless Receiver.
2. To turn off the ModMic hold the power button for 2 seconds. When powered off and unplugged all
indicator lights will be off.
SETUP
.