X4-Life 701538 Bedienungsanleitung Seite 34

4. You can position the projection by loosening the screws of the holder and screw
them tight after you positioned the lighting effect.
5. Connect the cable of the spotlight with the power supply transformer.
6. Make sure that the voltage supply of the used power outlet meets the required
voltage (220 – 240 V ~ 50/60 Hz). Please be aware of any security issues for
sockets outside.
7. Make sure you lay the cable in a way that the danger of stumbling is avoided.
8. You have to check the complete construction at regular intervals for
functionality, tightness and damage to prevent the defect of the device.
34