Cleaning And Maintenance - X4-Life 701538 Bedienungsanleitung

• Cables must never be crushed, folded over, damaged by sharp edges or
subjected to any other kind of mechanical stress.
• Avoid exposing cables to excessive heat or cold.
• If the mains cable or another cable connected to the product is damaged,
it must be replaced by the manufacturer or a similarly qualified person
(e.g. a qualified electrician).
• For safety reasons always take the plug out of the socket in the event of a
thunderstorm.
• Take the plug out of the socket during installation and cleaning, and when the
product is not in use.

Cleaning and maintenance

DAnGEr
Always use a soft, dry and lint-free cloth to clean the unit's
exterior. If the device is extremely dirty you can use a soft cloth,
dampened with water or a mild cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol, petrol or thinners)
as these could damage the controls, casing or any markings and labels found on
the device.
30