pofung BAOFENG F8 Bedienungsanleitung Seite 7

With the programming software you can enable/disable the
VOX feature and select the sensitivity levels.
CPS programming path: Edit> VOX >Vox Gain
Quick operation radio
Without CPS programming software, you can perform the
following quick operations through the combination of PTT +
Side Key 1:
• On channels 1-5, press and hold the PTT + Side Key 1
key to turn on the radio and turn the VOX function on or off.
The VOX sensitivity is level 1-5, the level 1 sensitivity is the
highest, and the level 5 sensitivity is the lowest. Accompa-
nied by a voice prompt VOX ON or VOX OFF.
• On the 10th channel, press and hold the PTT + Side Key 1
to turn on the radio and turn on or off the prompt voice
function.
• On the 15th channel, press and hold the PTT + Side Key 1
to turn on the radio and switch the prompt language
between Chinese and English.
Battery recharge
F8 is equipped for using a 3.7V Li-ion rechargeable battery
pack which can be recharged connecting the socket of the
AC/DC wall adaptor to a mains power socket and inserting
the jack of the wall adaptor into the desktop charger plug. It
takes 4-5 hours to fully recharge the radio. For maximum
battery life, we recommend charging the battery pack when
the F8 is off and the battery pack is fully discharged.
Using a different battery charger other than the one
specified can cause damage to your device or may even
cause explosions and personal injuries.
The Battery power saving feature enables a reduction in
consumption of up to 50%. If it has been set, it automatical-
ly activates when the transceiver does not receive any
signal for more than 5 seconds in order to save the battery
life. Power saving can be disabled only through Program-
ming software.
EN