Tv Remote Control Buttons Available In Anynet+ Mode; Recording; Listening Through A Receiver - Samsung 8 Serie Bedienungsanleitung

TV Remote Control Buttons Available in Anynet+ Mode

❑
Device Type Operating Status
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Anynet+ Device
After switching to the device, while
playing a file
Device with After switching to the device, when you
built in Tuner are watching a TV programme
Audio Device When Receiver is activated
The Anynet+ function only works when the active source on the TV remote control is set to TV.
N
The button works only while in the recordable state.
N
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
N
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The Anynet+ functions do not operate with other manufacturers' products.
N
The , operations may differ depending on the device.
N
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it
N
will be represented as (*device_name).

Recording

You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER E button to select Anynet
2. Press the ▲ or ▼ button to select Recording(recorder): then press the ENTER E
button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTER E
button. Recording begins.
When the recording device is not displayed
N
Select Device List and press the red button to search devices.
Pressing the button will record whatever you are currently watching. If you are watching video from another device, the video
N
from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
N
a recording device, refer to the recording device's users manual.

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the Media Play feature, sound may not output properly through the receiver.
N
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the
N
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 21)
All manuals and user guides at all-guides.com
Receiver is set to On (by disconnecting the power cord or a power failure), the
English - 47
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER E buttons
Colour buttons / EXIT button
(Backward search) / (Forward search)
(Play) / (Pause)
P / button
/ button
=
MMUTE button
+
(HDMI-CEC).
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
(Stop) /
: DVDR
: On
Move Enter Return
U E R
: DVDR
: On
Move Enter Return
U E R