Samsung 8 Serie Bedienungsanleitung Seite 31

Wireless Network Setup (when Network Type is set to Wireless)
„
The menu is activated only if the 'Samsung Wireless LAN Adapter is connected. (See page 29)
N
Internet Protocol Setup
•
• Network Test : You can test or confirm the network connection status after setting up the network.
When unable to connect to an AP
N
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try
again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for
the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to
the Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,
please contact a Samsung Electronics at 1-800-SAMSUNG.
• Select a network
- Access Point: You can select the IP sharer to use when using a wireless network.
If a wireless network is not in the Select a network list, press the Red button.
N
When the connection is made, you will be returned to the screen automatically.
N
If you have selected an Access Point with a security authentication:
N
The Security Key input screen appears. Enter the security key and press the Blue
button on the remote control.
If security encryption type is WEP, 0~9, A~F will be available when you input
N
security key.
Button
▲/▼/◄/►
ENTER
Red button
Green button
Blue button
Connecting WPS (Wi-Fi Protected Setup)
❑
If Security Key is already set
„
You can select PBC, PIN, Security Key.
N
• Connecting by using PBC: Select a PBC (Push Button Configuration). Press the
PBC button on the AP (access point) within 2minutes, and wait for connection.
• Connecting by using PIN: Select a PIN (Personal Identification Number).
The message showing the PIN Code is displayed. Input the PIN Code at AP
N
device within 2minutes. Select OK and wait for connection.
Try again if connecting operation doesn't work
N
When the connection is not established although tried again, reset the access
N
point. Please refer to a manual of each access point.
• Connecting by using Security Key: When selecting Security Key, the input
window is displayed. Input the security key and press Blue button.
Try again if connecting operation doesn't work.
N
All manuals and user guides at all-guides.com
→ Auto / Manual
Operations
Moves the selection up/down/left/right.
Enters (Inputs) the selected character.
Switch between Upper- and Lower-Case Letters
You can delete an already entered character.
Press this button to finish entering the security key.
: In access point list, select WPS.
English - 31
Wireless Network Setup
_
Security Key
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
Move Number Enter
n E
Wireless Network Setup
Select a network
AP_1
PBC
AP_2
PIN
Search AP_3
Security Key
AP_4
Ad-hoc
Move Enter
n E
Press the PBC button on the access point.
Access Point Name : AP_3
Cancel
Press OK After input TV's Pincode in the access
point's setup.
Access Point Name : AP_3
PIN Code : 12345678
OK Cancel
Wireless Network Setup
_
Security Key
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
Move Number Enter
n E
Continued...
Number
0~9
Lowercase
Delete
Done
Return
R
3/9
Return
R
Number
0~9
Lowercase
Delete
Done
Return
R