Cleaning / Maintenance; General Handling Tips - Schiltknecht Messtechnik ThermoAir3 Bedienungsanleitung

ThermoAir3

Cleaning / Maintenance:

Schiltknecht instruments are precision products which will give fault-free
service if correctly handled. If you handle them as described in the operating
instructions, your instruments and probes will remain in a serviceable condition
and guarantee the reliable operation of the measuring system. Each
instrument has its designed range of application and is only to be used for this.
If faults should nevertheless occur, do not attempt to open the instrument
and repair it yourself; always have repairs carried out by our after-sales
service.

General handling tips:

- Protect the probes against severe vibration
- Do not kink the connector cable (risk of cable break)
- Never allow contact to measuring NTC
- Always carry out probe cleaning according to the cleaning instructions
- Never immerse probes in solvent
- Never blow probes through with compressed air
- Remove exhausted batteries immediately, or else they may leak and damage
the instrument. Play your part in protecting the environment! Old batteries
don't belong in the refuse bin, take them to a collection point for old batteries
or hazardous waste.
- Strong electromagnetic interference (e.g. transformers, radio transmitting
equipment) may affect the accuracy of the measuring instrument.
42 Schiltknecht Messtechnik AG