Steam Function - Blaupunkt 5KD94190 Montage- Und Gebrauchsanweisungen

12. Steam Function

1) In standby mode, press „ „ button, enter the steam mode, time lights up by default 10:00
The icon is displayed, signs light up, there is no Parallax
lit, tank icon on the right show the current water
temperature 100 lights up.
2) Press the „ „ key to switch to the temperature selected, the temperature flashes, at this
point, press „ „ or „ "
3) Press" „ to select the time setting mode. The default time is 10 minutes.
4) Press„ „ or „ " to select the cooking time. The MAX.time is 90 minutes.
5) Press „ „ button to start cooking.
13. Convection+Steam Function
1) In standby mode, press „ „ button, enter the steam mode, time light up by default 10:00.
Press „ „ or „ „ or „ "
the default temperature is
2) Press „ " to enter to the temperature selection.
3) Press „ „ or „ " to select temperature.(180, 190, 200, 210, 220degree)
4) Press „ „ button, adjust the steam(10, 20, 30), and the steam light will flash. Press
or „ " to set steam level (default 30 percent).
5) Press" „ to select the time setting mode. The default time is 10 minutes.
6) Press „ „ or „ " to enter the cooking time. The MAX.time is 90 minutes.
7) Press „ „ button to start cooking.
to select a temperature (50, 60, 70, 80, 90, 100).
repeatedly to select Conv. + Steam mode, the icon is displayed,
180 degrees.
display "10:00", "Min"
level (Water, lack of
51
and " ℃ "symbol
water). The default
„ „