Herunterladen Inhalt Inhalt Diese Seite drucken

Medistrom Pilot-12 Lite Bedienungsanleitung Seite 16

Vorschau ausblenden Andere Handbücher für Pilot-12 Lite:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All manuals and user guides at all-guides.com
Battery Not
Battery is in
Providing Power
Stand-by Mode
(PAP Device or
USB)
Coil whine
Battery is being
charged on
lower voltage or
lower wattage
If errors persist after taking the recommended action(s) contact Medistrom technical
support toll-free at 1-888-407-4791 (North America), 1-300-146-358 (Australia) or via
email at support@medistrom.com. Do not disassemble the device or attempt to
service the device yourself.
16
Press the Multi Function Button to
wake the battery from Stand-by Mode.
Disconnect all devices and cables.
Plug your DC output cable into the DC
Out port on the battery and press the
Multi Function Button.For USB Devices:
Disconnect all devices and cables. Plug
your DC output cable into the DC Out
port on the battery then plug in your
USB device into the USB Out port and
press the Multi Function Button.
No action required, the battery is
operating correctly. The Pilot-12 Lite
and Pilot-24 Lite are 12V and 24V backup
batteries respectively. You may hear
coil whine (a faint buzzing sound) in
later stages of charging if the battery is
charging on lower voltages or on a lower
wattage.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pilot-14 lite

Inhaltsverzeichnis