Possibilities For Insertion; Technical Information - Zanussi ZGG35214 Benutzerinformation

A) supplied seal
B) supplied brackets
CAUTION!
Install the appliance only on a
worktop with flat surface.
Installing hob under the hood
If you install the hob under a hood,
please see the installation
instructions of the hood for the
minimum distance between the
appliances.

Possibilities for insertion

The panel installed below the hob must be easy
to remove and let an easy access in case a
technical assistance intervention is necessary.

Technical information

Hob dimensions
Width
Depth
Bypass diameters
BURNER
Rapid
Auxiliary
Other technical data
TOTAL POWER:
Electric supply:
12
A
B
42
28
Gas original:
Gas replacement:
230 V ~ 50 Hz
Kitchen unit with door
A
60 mm
B
A) Removable panel
B) Space for connections
Kitchen unit with oven
The electrical connection of the hob and the
oven must be installed separately for safety
reasons and to let easy remove oven from the
unit.
290 mm
510 mm
Ø BYPASS 1/100 mm
G20 (2H) 20 mbar = 4,0 kW
G30 (3+) 28-30 mbar = 276 g/h
G31 (3+) 37 mbar = 271 g/h
30 mm
min 20 mm
(max 150 mm)
www.zanussi.com