Meccaniche Veloci Quattro Valvole 48 Classic Bedienungsanleitung Seite 18

Setting the remaining movements
Winding: unscrew the crown without removing it (position 1) and
wind manually by turning it clockwise (first time only). After this, the
mechanism is automatically wound by wrist movement turning the rotor
on its axis. The watch will stop if not worn for long intervals.
Time: pull out the crown to position 3 and turn anticlockwise to set the
hour. For more accuracy, stop the watch when the second hand is on
12.
Always rotate the hour and minute hands forwards when setting the
time.
Remember to screw the crown back into position once you have
finished setting the time and date.
16