3.8
Warning symbols
General warning
Duty of reading the use &
maintenance manual
Compulsory head protection
4.1
Tool starting
Recharge the battery (13) by means of the battery charger (16) (see paragraph 4.2).
1) Screw the pole (8) onto the transmission shaft (7), tightening by means of the key supplied.
2) Pre-assemble the nut (12) and the screw (11) onto the hooks by means of the Allen key supplied.
3) Insert the hooks into the pole (8) choosing among the ones supplied. Tighten by means of a 2.5 Allen key and
check whether each hook is well fixed on the pole (8).
4) Plug the battery (13) into its seat.
IMPORTANT!
The adjustable hooks (9) can be positioned at a minimum distance of 20 mm from each other, while the fixed hook (10) is
positioned at the top of the pole (8).
WARNING!
Never work on trees or staying on ladders, since it is extremely dangerous.
Before starting any task with the tool, wear protective clothes.
Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 19/03/2021
Compulsory adequate clothing
Compulsory hands protection
Compulsory feet protection
Pag. 23