Herunterladen Inhalt Inhalt Diese Seite drucken

Before The First Use - Linea 2000 DO8712W Gebrauchsanleitung

Gourmet-set
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
PARTS
1.
Grill plate with non-stick coating
2.
Setting of temperature
3.
Red "power on" indicator light
4.
Green temperature indicator light
5.
4 wooden spatulas
6.
4 small raclette pans
7.
Spoon
8.
Tray that catches exessive grease

BEFORE THE FIRST USE

·
Remove all packing materials and carefully clean the appliance, the grill plate and the mini pans before
the first use. (See "Cleaning").
·
Use a thin layer of vegetable oil in the mini pans and on the grill plate. This will prevent sticking and
cleaning after use will be easier.
When using the appliance for the first time a small amount of smoke may be released from the heating
·
element. This is completely normal and harmless. For this reason allow the appliance 10-30 minutes to
preheat before using for the first time in order to burn any possible remaining residues.
·
Place the unit preferably on a surface that is easy to clean. The surface should also be heat-resistant.
Do not place the appliance on an untreated wooden surface.
·
Make sure that there is enough ventilation around the grill.
Make sure that the grill is switched off. Plug into an earthed socket.
·
USE
·
Place the appliance in the middle of the table. Make sure that the space around the appliance is
properly ventilated.
Wait until you are sure that the grill plate is sufficiently hot before cooking on it; allow the appliance a
·
minimum of 10 and maximum 30 minutes to preheat.
Cut meat into small squares to shorten cooking time.
·
·
It is recommended to already remove as much food residues as possible during grilling with a wooden
spatula. When the remains are dried up, they are harder to remove.
SETTING OF TEMPERATURE
You can set the temperature of the appliance as required. The temperature ranges from minimum
·
(MIN) to maximum (MAX). A mid-way temperature is recommended. This switch is also the 'on'
switch, and MIN is the off position.
Turn the temperature regulator to the required position. The red indicator light will light up when the
·
appliance is plugged in, showing that the appliance is getting power. The green light will go on when
the desired tempeature is reached.
www.domo-elektro.be
6
1
8
3
4
5
2
7
19
DO8712W

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Do-8712ws

Inhaltsverzeichnis