Grundig ACCORO 102 MFW 102-6110 MV/AC3 Servicehandbuch Seite 34

Alignment
f. Select the area to be adjusted using the buttons 2 (top), 4 (left),
6 (right), 8 (bottom) then press the 5 button to activate it.
g. Select the adjustable beam (red/green/blue) using the 3 button.
h. If necessary display or suppress individual colours using the
, buttons.
(green) (blue)
i. Use the buttons 2 (up), 4 (left), 6 (right), 8 (down) to adjust
according to the test patterns (Point 6.3) and bring the red, green and
blue colours to coincidence (repeat the steps g to i).
j. Press the s button. The convergence menu appears.
buttons to select PAL Wide to Others then press the s
k. Use the
AS
button to confirm. The Adjust PAL Wide settings are transferred to
the PAL S.Live , PAL Cinema and PAL S.title modes.
l. Use the buttons to select the PAL S.Live , PAL Cinema and PAL
AS
S.title modes then press s to confirm.
If necessary correct the convergence settings (Points f to j).
m. Use the buttons to select PAL to NTSC(ALL) then press the s
AS
button to confirm. The PAL mode settings are transferred to the
NTSC modes.
n. To exit the convergence menu press the F and 7 buttons on the
service remote control (material number 759880647300) at the
same time.
o. Feed in an NTSC test pattern and begin with Point c.
6.3 Picture formats
6.3.1 Picture format 4:3 / Wide-screen Zoom (PAL Wide)
6.3.2 Picture format Super Live (PAL Super Wide)
6.3.3 Picture format Cinema Zoom (PAL Cinema)
2 - 8
6.3.4 Picture format Cinema Zoom with subtitles (PAL Subtitle)
Note: after exiting this service function the picture is shifted about
13mm to the top.
,
(red)
6.3.5 Picture format 4:3 / Wide-screen Zoom (NTSC Wide)
235
207.5
124.5
41.5
0
41.5
124.5
207.5
6.3.6 Picture format Super Live (NTSC Super Wide)
235
[mm]
249
220
130.5
40
0 (pattern center)
-5 (screen
49.5
center)
136.5
221
6.3.7 Picture format Cinema Zoom (NTSC Cinema)
249
[mm]
262.5
227.5
157.5
52.5
0
52.5
157.5
227.5
262.5
[mm]
ACCORO 102
272
240
144
48
0
48
144
240
272
[mm]
231
198
99
0
99
198
231
[mm]
249
213
105
0 (pattern center)
-5 (screen
center)
112
216
249
[mm]
287
246
123
0
123
246
287
[mm]
GRUNDIG Service