Introduction - Swim & Fun eeese air cooler 1000 Benutzerhandbuch

UK
1.

Introduction

Cooling
Cooling with the air cooler 1000 is a perfectly natural and affordable cooling method with
low energy requirements. The device produces moist cool air by using the evaporative
cooling principle. The hot room air is cooled by being sucked through an absorbent filter
that is soaked with water.
The air cooler 1000 is best suited for smaller spaces where doors and windows are
wanted to be kept open. In the humid northern regions, the unit's exhaust air will likely be
cooled by between 3 and 5 degrees, depending on the temperature and humidity of the
intake air. Therefore, the air cooler 1000 is unable to cool a room from 30 ° C to 23 ° C,
but the less the humidity, the more the air cooler 1000 can cool a room.
There is no water discharge as in the case of mobile air conditioning units, neither is hot
air discharged through a window, a door or a hole in the wall. It makes the air cooler 1000
flexible and easy to handle. Fill the tank with water, connect it to a power source and
press ON.
The evaporator is in accordance with international standards for environmental protection
Filtering
This device filters out harmful micro-substances such as dust, fibres and the like from
the air.
Evaporation
The air cooler 1000 will add moisture to dry air and maintain a healthy moisture balance in
indoor living areas for the benefit of the skin and eyes.
Air flow selection
The unit has three air flow options: High, medium and low, which meet a broad range of
needs.
Choice of air flow type
Choose between three types of air flow mode: Smooth which gives off a constant
breeze, Varied, which simulates a natural breeze and Night, which is a muted version of
the Varied mode.
Air flow direction
By automatically oscillating, this unit can blow out air over a radius of 120 degrees.
41
MV-2510-12-2020 . swim-fun.com © All rights reserved Swim & Fun Scandinavia ApS