Optional Accessories; How To Assemble Your H2O™ Hd - H2O HD KB-019 Benutzerhandbuch

Optional Accessories

1. Jet Nozzle
2. Round Brush (Nylon)
3. Copper Brush
4. Cleaning Pin
5. Extension Hose (for the Hand-Held
Steamer)
6. Window Cleaning Tool
7. Window Cleaning Cloth
8. Garment Steaming Cloth
9. Lint Cloth
10. Microfiber Scrubbing Cloth for
Window Cleaning Tool
11. Scraper - Rigid Blade
12. Duster with Coral Cloth
13. Long Steam Lazer™
14. Bendable Jet Nozzle
15. Additional Round Brushes in
different colors
16. Accessory Bag
17. Microfiber Scrubbing Cloth for
Mop Head
18. Coral Cloth for Mop Head
5
1 2 3 4
6 7 8 9
11 12 13 14
16 17 18
How to Assemble Your H2O™ HD
1
5
Step 1: Attach the H20™ HD Mop Head, then insert and tighten the provided screw into the hole on the back (screwdriver not provided).
Step 2: Pull handle upwards to an upright and locked position.
Step 3: Insert the Power Supply Cord into the Cord Lock Slot located on the handle.
Step 4: Attach the Microfiber Cloth by placing the cloth under the Mop Head. Align fastening strips of the cloth with the gripping strips on
the bottom of the Mop Head. Press to fit together.
Step 5: When using the H2O™ HD Steam Cleaner on carpeting or rugs: Place the Mop Head, with Microfiber Cloth in place, on top of the Carpet
Glider as illustrated in Fig. 5. Do not attempt to use the H2O™ HD Steam Cleaner on carpeting or rugs without the Carpet Glider in place. Never
10
use the Carpet Glider on surfaces that are prone to scratching.
!
CAUTION
Make sure that the unit is unplugged from an electrical outlet and the Power Switch ( I / O ) is in the "OFF" ( O ) position
before assembling the unit or changing the accessories.
15
2 3 4 5
6