Chauvet 4BAR Tri Schnellanleitung Seite 3

EN
Product
Description
Product Overview
AC Power
Power Linking
Fuse Replacement
Mounting
Product
Mounting
Diagram
Control Panel
Description
The 4BAR™ Tri is a pack-and-go must have for DJs, bands and other
performers who want a complete LED wash light system. The 4BAR™ Tri
has high power tri-colored LEDs for an intense and uniform color output.
The tri-colored LEDS are perfect for front lighting as they nearly eliminate
multi-colored shadows.
DMX
In/Out
Sound Sensitivity
Adjustment Knob
Microphone
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 8 4BAR™ Tri units at 120 VAC or 16 units at 230 VAC.
To replace the fuse in the 4BAR™ Tri:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Pan Angle Adjustment Knob
Tilt Angle
Adjustment
Knob
Button Function
<MENU> Exits the current menu or function
Navigates up through the menu list or increases the numeric
<UP>
value when in a function
<DOWN> Navigates down through or decreases the numeric value
LED Display
Clamp Hanging Bolts
Tripod Insertion Point
3
4BAR™ Tri QRG
Power
In/Out
Fuse Holder
Back Panel View