Gas Cylinders - Dometic FO250SA Installation, Gebrauch, Wartung

Use

7.6 Gas cylinders

CAUTION!
The use of gas and/or a pressure different from those indicated
by the manufacturer could cause irregular and incorrect operation
of the appliance. The manufacturer declines all liability for the
incorrect or improper use of the appliance.
The gas cylinders to be used are the most common in the country where
the appliance is used. The gas to be used is clearly indicated on the outside
of the packaging and on the indelible label attached on the back of the
appliance. In any case, observe the following: Gas cylinders with valve and
pressure reducer must be placed in an upright position and in the appropriate
compartment, and access should not be impeded. Replacement of the
cylinders must be performed without impediment and with ease.
Replacing the gas cylinder
 Close the taps of the appliance.
 Make sure no flames or fire are nearby.
 Close the valve of the cylinder to be replaced.
 Unscrew the pressure reducer of the empty cylinder, take it out of the
compartment.
 Proceed in reverse order for replacement.
 Check for gas leaks with the use of a non-corrosive fluid.
CAUTION!
● Do not use a soap and water solution.
● Do not use an open flame.
 Turn on the burners and check for proper operation, otherwise contact
an authorised technician.
CLOSE THE CYLINDER GAS SUPPLY AFTER USE.
36
FO250SA - FO250FSA - FO252SA - FO252FSA
EN