Beper 40.943 Betriebsanleitung Seite 10

Massage cushion Use instructions
This massage cushion is not a professional appliance and has been manufactured only for personal
use, in order to practise a beneficial massage on tired muscles. Do not use the massage cushion
instead of medical care. Do not use the massage cushion for more than 30 minutes. The excessive
use can cause breakdown. If that happens, stop immediately the appliance and wait until the ap-
pliance is completely cool to use it again.
DESCRIPTION
1 – Massage cushion
2 – Massage shoulder motor
3 – Massage back motor
4 – Massage motor
5 – Massage motor buttocks and thighs
6 – Control panels
7 – Fixing strap
8 – Socket adaptor
9 – Car adapter
10 – Cord supply
CONTROL PANNELS
Press POWER to start massage cushion. The massage cushion start to vibrate in position 0.
Press MODE to select desired massage function from 0 to 7.
Press HEAT for relax hot massage.
A stropwatch on the control panels runs until 30 minutes, recommended time for a pleasant massa-
ge. When finished the time it is recommended to make a break before next massage.
INSTRUCTION
The massage cushion is perfect to eliminate muscular or physical tiredness, the pains caused by a
bad blood circulation or muscular tension. The massage cushion has been studied for the massage
of each part of the body, a comfortable way and with effects similar to those of a manual massage,
thanks to its 10 engines placed to cover all the parts of the body.
1 – Place the massage cushion on a seat/chair /car seat.
2 – Fix the massage cushion on the seat/chair/car seat with fixing strap provided (7).
3 – Plug the cord supply (10) on the socket at home or in office, or on the car plug if you are in your
car.
4 – Seating on the massage cushion, you will find the control panel on your right.
5 – Press POWER to start massage.
6 – Select the type of massage by pressing MODE.
7 – if you want you can activate HEAT function.
8 – Press POWER to switch off the massage cushion when massage ends.
9 – Press HEAT to stop heat function.
10- Unplug the adapter from the socket, then remove the adapter from the cord supply.
10