Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use with factory setting
Step 2
Screw the sensor into the
adapter. Avoid mechanical influ-
ence on the sealing chamfers.
Step 3
Clamp sensor and adapter into a
clamping device (D). The sealing
chamfers (E) must not be dam-
aged. Tighten the sensor with a
spanner until you can feel the
end stop.
Note: If you continue to turn,
this can have adverse effect on
the sealing.
Electrical connection
The unit must be connected by a suitably qualified electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply to EN50178, SELV, PELV / "supply class 2" to
cULus.
Disconnect power before connecting the unit as follows:
2 wire connection
1
BN
2
WH
BK
4
3
BU
Core colours of ifm sockets: 1 = BN (brown), 2 = WH (white),3 = BU (blue),
4 = BK (black); n.c. = not connected.
All manuals and user guides at all-guides.com
3 wire connection
L +
L-
n.c.
n.c.
1
BN
L +
2
WH
BK
4
n.c.
3
BU
L-
D
E
Connector view
(sensor)
1
4
2
3
15
2
Werbung
Kapitel
