Mono Mode - Kruger & Matz KMPM2 Bedienungsanleitung

PAIRING
1. Take out both earphones from the case. The earphones will connect
with each other automatically.
2. The LED indicator on the left earphone will flash, indicating entering
pairing mode.
3. Turn on the Bluetooth function on the external device and search for
new Bluetooth devices.
4. Select KM M2 and connect the external device with the earphones.
5. After successful pairing, the LED indicator will stop flashing, and the
audio cue will be played.
Note:
• The earphones will turn off after 3 minutes of idle.
• The distance between earphones can't exceed 2 meters.

MONO MODE

• You can use just one of the earphones. After pairing the earphones with
the external device, place one of the earphones in the case, or turn it off.
The second earphone will stay connected to the external device.
• The earphones connect with each other automatically after turning on.
If not, place both earphones in the charging case and touch and hold the
touch panel on both earphones for about 20 seconds. After turning them
on, they will connect with each other.
TOUCHPANEL FUNCTIONS
• Tap once to play or pause the music.
• While playing, touch and hold the touch panel of the right earphone, to
fast forward to the next track.
Owner's manual
9
Owner's manual
• While playing, touch and hold the touch panel of the left earphone, to
go back to the previous track.
• While playing, tap the touch panel of the left earphone twice, to
decrease volume.
• While playing, tap the touch panel of the right earphone twice, to
increase volume.
• Tap once to pick up an incoming call.
• Tap and hold to reject an incoming call.
• Tap the touch panel of the right earphone three times to activate the
voice assistant.
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that Wireless
Earphones KMPM2 are consistent with directive 2014/53/UE.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems) This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
10