Inhaltszusammenfassung für Kaiser & Kühne Actio 401
Seite 1
INSTALLATION 0-27401-001 Actio 401 Werkzeuge tools 10 mm 8 mm 95 Nm Kaiser & Kühne min. 24 mm 19 mm 36 mm 2,5 m 3,6 m customer Im Südloh 5 D-27324 Eystrup Tel. +49(0)42 54 - 93 15 0 EN 1176...
Seite 2
Montageanweisungen Installation instructions 1. Gerätestandort unter Berücksichtigung des 1. Assign a device location considering the space Platzbedarfs (Aufprallfläche) festlegen. requirements (impact area). 2. Bodenaushub für Fundamente nach Zeichnung 2. Excavate soil for foundations, according to vornehmen. Bitte beachten Sie: Für eine stand- drawing.
Seite 3
Geräteraum space occupied by equipment 13,20 x 10,64 x 2,93 m max. Actio 401 0-27401-001 26/06/2019...
Seite 4
Darstellungen mit Stampfbeton C20/25 herstellen. At first install all components, allign their and tighten all screws. Then grouth foundations with commpressed concrete C20/25 according to the illustrations. 3,6 m 7 x 24h Spielebene playing surface Beton Grobkies concrete gravel Actio 401 0-27401-001 26/06/2019...
Seite 5
Komponenten components 1090407 1090391 1090443 67 kg 56 kg 62 kg 1090444 67 kg Actio 401 0-27401-001 26/06/2019...
Seite 7
Ersatz für c 2017 Tornado- Big- gro.+ Fundament Ersetzt durch Kaiser & Kühne Freizeitgeräte GmbH Maßstab Blattformat Zeichnung Artikel 17012002SE D-27324 Eystrup 1 : 20 Telefon 04254 / 93150 DXF-Nebendatei Telefax 04254 / 931524 1090408 1090374 1090372 Actio 401 0-27401-001 26/06/2019...
Seite 8
Step 1090407 1090429 1090444 19 mm DIN 933 A2 M12x30...
Seite 9
Step 1090436 95 Nm 1090440 DIN 912 DIN 986 A2 M12x60 A2 M12 point level - P4 point level - P3...
Seite 10
Step 1090378 24 mm min. 2,5 m ISO 7380 A2 M8x10 DIN 933 A2 M16x55 DIN 125-17 1090378...
Seite 11
Step 1090374 95 Nm 19 mm DIN 912 A2 M12x60 DIN 986 A2 M12 point level - P5 DIN 933 A2 M12x25...
Seite 12
Step Step 95 Nm DIN 986 A2 M12 DIN 912 A2 M12x60...
Seite 13
Step 1090361 1090362 ISO 7380 A2 M8x16 1090362...
Seite 14
Step Top View 1090361 min. 2,5 m 24 mm ISO 7380 A2 M8x10 DIN 933 A2 M16x55 DIN 125-17 1090361...
Seite 15
Step 1090408 Top View 24 mm min. 2,5 m ISO 7380 A2 M8x10 DIN 933 A2 M16x55 DIN 125-17 1090408...
Seite 16
Step 1090448 95 Nm DIN 986 A2 M12 DIN 912 A2 M12x60 point level - P5...
Seite 17
Step 1090407 1090391 1090429 1090443 19 mm DIN 933 A2 M12x30...
Seite 18
Step 1090440 95 Nm DIN 986 A2 M12 1090440 DIN 912 A2 M12x60 point level - P3...
Seite 19
Step Top View 19 mm 36 mm min. 2,5 m ISO 7380 A2 M8x10 NORD-Lock DIN 985 A4 M12 A2 M24 DIN 931 A2 M12x75...
Seite 20
Step 1090442 95 Nm DIN 986 A2 M12 DIN 912 A2 M12x60 point level - P2...
Seite 21
Step 19 mm 1090372 95 Nm DIN 986 A2 M12 DIN 912 A2 M12x60 point level - P5 DIN 933 A2 M12x25...
Seite 22
Step 2030434 95 Nm DIN 986 A2 M12 DIN 912 A2 M12x60...
Seite 23
Step 1090341 1090393 Status In Arbeit Projektionsmethode Material 24 mm Datum Name Verwendung: Fertigung gez.: 22.03.2017 SE Vorgang gepr.: genehm.: Ersatz für Benennung: c 2017 Tornado- Big- gro.+ Fundament Ersetzt durch Kaiser & Kühne Freizeitgeräte GmbH Maßstab Blattformat Zeichnung Artikel 17012002SE D-27324 Eystrup 1 : 20...
Seite 24
Step 1090351 24 mm min. 2,5 m ISO 7380 A2 M8x10 DIN 934 A2 M16 DIN 125-17 1090351...
Seite 25
Zuerst alle Anbauteile einbauen, ausrichten und alle Schrauben anziehen. Danach Fundamente entsprechend den Darstellungen mit Stampfbeton C20/25 herstellen. At first install all components, allign their and tighten all screws. Then grouth foundations with commpressed concrete C20/25 according to the illustrations.