Inhaltszusammenfassung für Kaiser & Kühne Actio 293
Seite 1
INSTALLATION 0-27293-000 Actio 293 Werkzeuge / tools 10 mm 8 mm 95 Nm Kaiser & Kühne 17 mm 19 mm 36 mm 5 mm min. 18 mm 2,5 m 1,931 m Kunde / customer Im Südloh 5 D-27324 Eystrup Tel. +49(0)42 54 - 93 15 0 EN 1176 www.kaiser-kuehne.com...
Seite 2
Montageanweisungen Installation instructions 1. Gerätestandort unter Berücksichtigung des 1. Assign a device location considering the space Platzbedarfs (Aufprallfl äche) festlegen. requirements (impact area). 2. Bodenaushub für Fundamente nach Zeichnung 2. Excavate soil for foundations, according to vornehmen. Bitte beachten Sie: Für eine stand- drawing.
Seite 3
Geräteraum space occupied by equipment 3,93 x 0,60 x 2,93 m max. Mindestraum minimum space 6,93 x 4,80 x 2,93 m 25 m² 0,60 m 4,80 m Seite/Page: 3 - Art. 0-27293-000...
Seite 4
Fundamentplan foundation plan Fundamente (bauseits) Betonbedarf (ca.) Foundations (on site) Concrete amount (approx.) 1x 4,50 x 0,85 x 0,50 m 1,913 m³ 1,913 m 7 x 24h Zuerst alle Anbauteile einbauen, ausrichten und alle Schrauben anziehen. Danach Fundamente entsprechend den Darstellungen mit Stampfbeton C20/25 herstellen.
Seite 5
Fundamentplan foundation plan 0,85 m Seite/Page: 5 - Art. 0-27293-000...
Seite 6
Komponenten components playing surface playing surface 1090552 1090553 Spielebene playing surface Seite/Page: 6 - Art. 0-27293-000...
Step Temperatur Aushärtezeit Temperature Curing Time - 4°C − ± 0°C 10 hrs + 1°C − + 5°C 45 Min. 18 mm + 6°C − +10°C 30 Min. + 11°C − +20°C 20 Min. + 21°C − +30°C 5 Min. + 31°C −...
Seite 10
Step min. 6 mm 1090554 2,5 m Seite/Page: 10 - Art. 0-27293-000...
Seite 11
Step 6 mm Temperatur Aushärtezeit Temperature Curing Time - 4°C − ± 0°C 10 hrs + 1°C − + 5°C 45 Min. + 6°C − +10°C 30 Min. + 11°C − +20°C 20 Min. + 21°C − +30°C 5 Min. + 31°C −...
Seite 12
Zuerst alle Anbauteile einbauen, ausrichten und alle Schrauben anziehen. Danach Fundamente entsprechend den Darstellungen mit Stampfbeton C20/25 herstellen. Bei Seilspielgeräten gilt folgende Ausnahme: Die Montage der Seilelemente erfolgt erst nach Abbinden der Betonfundamente. First of all, install and align all components and tighten all screws. Afterwards, prepare foundations with compressed concrete C20/25 according to the graphics.