eQ-3 Entwicklung Easy Home control Bedienungsanleitung Seite 22

Software. Therefore, start the device detection via the
zard. You will attain to „Geräteerkennung". If you alrea-
menu item „Meine Geräte".
Perform a long press of the „OK" key on the Wall Ther-
mostat.
The antenna symbol appears in the display and the Wall
Thermostat will be recognized by the Software.
Assign the Wall Thermostat to a room.
The Wall Thermostat is now integrated in the system and
Now teach-in the Plug Adapter to the Cube via the Soft-
ware. Therefore, start the device detection via the local
software. Press and hold down the teach-in button (B)
The teach-in time is 30 seconds.
If teach-in has been successful, the device LED (A)
pear in the Software.
22
a b c d e f
-
-