MiWire ROUDEM CAT4 Benutzerhandbuch Seite 4

GETTING STARTED IS EASY
Turn on the power to the supplied power
adapter and turn on your MiWire RouDem.
The RouDem should be placed outside, either
horizontally or mounted. If it is connected
using the supplied indoors router, you will
also need to turn on the power to this. If
RouDem is charged, you can also turn it on
using the button on the bottom. RouDem will
now start with the LED indicator indicating
its status:
RED: The device is starting up, calibrating
and connecting with the correct cell tower.
The red light will remain on if there are any
errors or problems with the SIM card.
BLUE: The device is connected to the network
and is working, but not at its maximum.
CONFIGURATION OF WIRELESS INTERNET VIA ROUDEM
1. Return to the home screen and select
Settings > WiFi.
2. Select a wireless network or turn WiFi
on. The device will automatically search for
available WiFi networks.
3. Tick the name containing 'MiWire'
and the connection to your device will be
established.
4. The WiFi network 'MiWire-XXXX'
requires a WiFiKey. Enter the WiFiKey,
XXXXXXXXXXXX for the secure WiFi
LOG ON MIWIRE USER INTERFACE
User interface
1. Open the MiWire user interface in
your browser by entering the web adress
http://192.168.2.1
2. Open your user account by using the
username admin and password 1234.
This will take you to the Status page, where
you can check the status. You can also view
6
The indicator will be either
red, blue or green
GREEN: The devices is ready for use and the
green indicator shows the direction of the cell
mast.
network, then click 'Connect' (you will find
the WiFi Key under RouDem, on the box or
on your registration flyer).
WIRELESS NETWORK
SSID (network name): MiWire-XXXX
WiFiKey: XXXXXXXXXXXX
USERINTERFACE
Browser: http://192.168.2.1
Username: admin
Password: 1234
the details of your SIM card and the status
of the built-in battery.
YOUR MIWIRE ROUDEM IS WORKING CORRECTLY WHEN ALL
THE LAMPS ARE GREEN
The lights will show
red, yellow or green
REMEMBER TO REGISTER YOUR MIWIRE ROUDEM
You need to register your RouDem so
that we can give you the best service and
support.
1. Enter register.miwire.net in your
browser.
2. Enter product information. You will
find your IMEI number and serial number
under RouDem, on the box or on your
registration flyer.
3. Fill in the rest of the information and
press submit registration.
EN
Choose a new password
For optimum security, we recommend
changing the password on your admin
page and restarting your MiWire
RouDem. When all the status lights on
the page are green, this means you are
up and running again.
Please note:
We will accept absolutely no liability
if you fail to change your access code
and your private data is misused.
ONLINE REBOOT OF ROUDEM
If you wish to reboot/restart your RouDem,
you must first log in to the MiWires user
interface. http://192.168.2.1
1. At the top of the menu bar, press Admin.
2. Under Device Commands you should
press the Reboot button.
You will then lose the connection RouDem
while it reboots.
3. After a few minutes the RouDem will
finish rebooting and will be ready for use
again.
7