Operation - Tractel tirfor TU 6PM Installations- Und Wartungsanleitung

GB
Anchor pin in position
Spring clip closed.
Spring clip open.
5.2. blocstop™ safety devices
The blocstop™ safety device must be
anchored by attaching it to the stirrup on the
platform, or to the special device, using two
H M 12 bolts for 15.301 and 20.301, and two H
M 22 bolts for 35.30.
Bolzen
Wire ropes specially designed by TRACTEL for
hoists and for the blocstop™ safety device
must be used. These wire ropes are fitted with
hooks.
The anchoring hooks are fitted with a safety
catch. In all cases the equipment must be
anchored in such a way that the flap freely
returns to the correct closed position, pressing
on the tip of the hook.
WARNING : It is essential for safe operation
of the equipment that a check is made to ensure
that the anchoring hooks are correct- ly locked
before a load is applied.

6. OPERATION:

6.1. tirfor ® hoists:
The tirfor ® is very simple to operate by moving
the telescopic handle with a to and fro move-
ment whose movement
according to the preference of the operator.
Any interruption in operation results in the auto-
10
can vary