Status Light - VOSKER V150 Schnellstartanleitung

If you have no signal, move outside or get near a window and restart
the camera a few times if need be to get all the information from the cell
network.
When the light found on the top right of the camera is flashing red
"Delay light", it is a 30-second countdown before the photo mode is
activated.
When all the lights on the camera turn off, the camera is ready to use.
The camera has now updated its status in the VOSKER app with its latest
information. The camera is now ready to take pictures and transmit them
to your VOSKER app.
IF THE "STATUS LIGHT" IS RED AFTER STEP 3, WE RECOMMEND
TRYING THE FOLLOWING OPTIONS TO IMPROVE THE SIGNAL :
• Turn off your camera and turn it on again;
• Try positioning the antenna at a different angle;
• Move your camera.
Note that the "Status light" signal on a V150 might not be equal to your
other cellular devices as there are no industry standard and practice to
label dBm values to a specific number of bars.

STATUS LIGHT

When the "Status light" flashes in GREEN, the camera is searching for a
signal. Searching for a signal may take several minutes. During regular
use, the "Status Indicator" lights will also indicate when files are being
saved or transferred.
5