Herunterladen Diese Seite drucken

Renkforce RF-SW-130 Bedienungsanleitung Seite 4

Digitale stoppuhr, schwarz, 100 runden, 3-zeiliges display

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

d) Clock
This function displays the time in hours (in either 12- or 24-hour formats), minutes and seconds,
the date in years, months, weeks and days.
- Press the D key to select the clock function, and then press the B key to toggle between
time and date items. Press the A key to adjust the selected time and date item.
e) Alarm
- Press the D key to select the alarm function.
- Press the B key to toggle to the desired item, and then press the A key to adjust and set
the alarm time.
- Press the D key to confirm the alarm.
- Press the C key to switch the alarm clock ON/OFF.
- "On" will be displayed when the alarm is set and "-" will be displayed after the alarm has
gone off.
- Note: When a set alarm goes off, there will be a continuous alarm lasting 1 min. Press
the C key to turn off the alarm. If the display is dim or is not showing, the battery may
need replacing. To replace the battery, unscrew the screws and remove the back cover.
Then loosen the battery contact piece and replace the battery with a new CR2032 lithium
battery. After the battery has been replaced, long press the Mode key to turn on the
stopwatch.
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU
declaration of conformity in the available languages.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
As the end user, you are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in household waste is prohibited.
Batteries containing hazardous substances are labeled with this symbol to indicate
that disposal in domestic waste is forbidden. The abbreviations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g.,
below the waste bin icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or
wherever batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Timer accuracy ............................. 1/100 seconds
Display .......................................... 3-line display
Timer laps ..................................... 100 laps
Time format .................................. 12/24 hour
Operating/storage conditions ........ 0-40 °C (operating)
5-40 °C (storage)
10-85% relative humidity (non-condensing)
Dimensions ................................... 65 x 82 x 21 mm
Weight .......................................... 61 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
*2306492_v2_0121_02_DS_m_2L_(1)

Werbung

loading

Diese Anleitung auch für:

2306492