Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
RF-SW-130
Digital stopwatch, Black, 100 laps, 3-line Display
Item No. 2306492
Intended use
This product is a professional sports stopwatch with a countdown timer, metronome, clock
and alarm. It features a large 3-line display with a 100-lap display timer and has an accuracy
of 1/100 seconds.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Stopwatch (CR2032 battery included and installed)
• Neck strap
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions, or
- Has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the PCB
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• The batteries should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damagedbatteries
may cause acid burns when in contact with skin, therefore always use suitable
protective gloves to handle damaged batteries.
• Batteries must be kept out of reach of children. Do not leavebatteries lying
around, as there is a risk that children or pets may swallowthem.
• All batteries should be replaced at the same time. Mixing old and new batteries in
the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. Risk of explosion!
Operating elements
C
B
Operation
a) Timer
This function displays the segment time, total segment time and continuous time of the
stopwatch. It can measure up to 9 hours, 59 minutes and 59.99 seconds and can display
the fastest (FS), slowest (SL) and average (AV) segment time. 10, 30, 60, 100 channels are
supported, and segments can be recorded.
- Press the D key to access the timer function ("CHRONO" is displayed), and then press
the A key to start timing.
- Press the B key to display the first split time segment, which is displayed on the top line.
The total segment is displayed on the middle line and the continuing time is displayed
on the bottom line.
- Pressing the B key again displays subsequent split time segments. Dots displayed in the
upper-left corner indicate the total number of split time segments.
- Press the A key to stop the timer.
- Press the C key to display the first split time segment. "RECALL" will be displayed.
Pressing the C key again displays subsequent split time segments.
- Press the A key to display the average (AV) split time, and press the B key to toggle the
display of the fastest (FS) and slowest (SL) split time.
- Press the C key again to restore the initial stopped state of the timer.
- When the timer is stopped, press the B key to return the time to zero.
b) Countdown timer
1. This function has an automatic cycle and time display that can be preset for up to 9:59'59"00.
- Press the D key to access the countdown timer function, and then press the B key to
adjust the number to the desired countdown start time. Press the D key to confirm the
desired start time.
- Press the A key to start (or stop) the countdown timer. When the countdown timer reaches
zero there will be a beep and it will automatically restart.
- The number of times the countdown timer has restarted will be shown in the lower row.
c) Metronome
This function can be used to set specific beats per minute. It is adjustable from 10 to 320 beats
per minute and simultaneously displays the frequency, pace and total time.
- Press the D key to access the metronome function ("PACE" will be displayed). The two
numbers on the bottom line will flash on and off.
- Press the B key to select the desired pace (10, 20, 30, 40, 60, 80, 120, 160, 240 or 320
beats per minute). For example, if a pace of 320 is selected there will be 320 beeps per
minute.
- Press the A key to activate the metronome. The total time will be displayed on the top line,
the pace on the middle line and the frequency on the bottom line.
- Note: The metronome settings will not be saved when other functions are used on the
stopwatch.
A
D
Werbung
