Alber e-fix E35 Gebrauchsanweisung Seite 5

See the operating manual for the e-fix E35 regarding attachment and removal of the control unit E35
E 25
E 25
5
4
Always switch off the control unit prior to attachment or removal! This prevents
!
your wheelchair from rolling away unintentionally, e.g. due to accidental contact
with the joystick.
Always ensure that the control unit does not fall onto the ground! If the control
!
unit is switched on and it falls to the ground, this could trigger an
unintentional travel impulse.
2
3
4
Instructions for use swivel arm e-fix
Attaching the control unit E25
• Push the control unit with the guide rail [2] into
the mount [3] without
coming from the interface.
• Slide the control unit into the position you want
and fix it in place by turning the clamping lever
[4].
• Now connect the connection cable [5] to the
control unit.
Removing the control unit E25
• Switch off the control unit.
• Remove the connection cable [5] from the
control unit.
• Loosen the locking lever [4] and pull the control
unit out of the mount [3].
the connection cable [5]
4